Frigidaire Gas Stove Range FGFL67DCD

[ucadam]

I just bought a friends Range its less than 3 yrs. old. Broiler and Stove work great, but when I try to lite the burners they click..and make a good ark, but they wont lite. I can lite all 4 burners with a match, but the bigger burner wont adjust between flames always on low.


Any help would be appreciated.

Thanks

[jeff1]

Hi,


but when I try to lite the burners they click..and make a good ark, but they wont lite.

Make sure the caps are in place correctly. Make sure the slots/hols around the electrodes are clear and clean. Make sure the electrodes are not cracked. If all looks good, probably best to try a new spark module as the spark may be weak.

527 Spark module Manufacturer Number 316135702 (http://www.repairclinic.com/referral.asp?R=153&N=1483923)


http://www.youtube.com/watch?feature=player_embedded&v=yHMvuppk1ZU


the bigger burner wont adjust between flames always on low.

The stem valve controls the gas flow...

528 Burner control valve Manufacturer Number 5303935236 (http://www.repairclinic.com/referral.asp?R=153&N=1036845)

jeff.

[ucadam]

I will give it a try.. Thanks


Hi,



Make sure the caps are in place correctly. Make sure the slots/hols around the electrodes are clear and clean. Make sure the electrodes are not cracked. If all looks good, probably best to try a new spark module as the spark may be weak.

527 Spark module Manufacturer Number 316135702 (http://www.repairclinic.com/referral.asp?R=153&N=1483923)


http://www.youtube.com/watch?feature=player_embedded&v=yHMvuppk1ZU



The stem valve controls the gas flow...

528 Burner control valve Manufacturer Number 5303935236 (http://www.repairclinic.com/referral.asp?R=153&N=1036845)

jeff.

[ucadam]

Is their a video on how to install the Control Valve..?

[jeff1]

Not that I am aware of.

jeff.

[ucadam]

I finally got the burners to lite... but its random.. I think I need to replace the burner heads and caps. My larger front burner, only lites on one side, but when I raise the cap it lites all the way around, when I put it back down half goes out..

[jeff1]

Make sure all the holes and slots are cleaned out.....and not with an SOS pad as that leaves soap crud in the holes and slots.

jeff.