Frigidair range test

[Boman]

Model - FEF326ABD

While checking this stove out today to see if ti might be worth cleaning, everything seemed to be working as it should. Everything except broil. On broil, it only gave 2 reading, H1 and what looked like L11, no in between temps. The 11 in the 'L1' might have been an 'H' with a faulty led.

Are these normal readings for that stove on broil?

P.S. Noticed rodents had been in it. Scrapped it for parts, electronic board, infinite switches, knobs, stat, and elements. If these readings are abnormal, I guess that would mean the board is faulty.

[jeff1]

On broil, it only gave 2 reading, H1 and what looked like L11, no in between temps.

Should be HI and LO. High is 100% on and low should be approx 75% on.
Possible a couple of the clock segments do not work LO - Lll, with the top and bottom segment being out.

jeff.

[Boman]

Should be HI and LO. High is 100% on and low should be approx 75% on
That is exactly what it looked like was happening.


LO - Lll, with the top and bottom segment being out.

Are you saying readout might have been faulty? Kind of what I thought, but did not know if maybe it was an error code.
I think the stove was working properly (after I changed the bake element) , but it was still not worth cleaning. Parts worth way more.

[jeff1]

Are you saying readout might have been faulty?

Yes.


but it was still not worth cleaning. Parts worth way more.

Yupper!

jeff.