jeff1
02-01-2014, 03:06 AM
Appliance tip of the week...
Washer issue
Brand: Whirlpool Duet Sport
Model Number: WFW8300SW01
Your Complaint:
Have been getting SD error followed by F-21 error. Manually drained washer and checked for anything in the drain pump filter, nothing there. Plugged back in and did drain/spin cycle and the washer would drain. After manually draining this time and starting drain/spin cycle, just heard a hum. The drain motor was previously very load. It didn?t drain and this time I got a F-33 error and noticed the drain pump was very warm to the touch.
All of the error codes and symptoms you?re describing, including the loud drain pump, are all classic signs of one thing: Time to replace the drain pump (http://www.repairclinic.com/referral.asp?R=153&N=1373005).
One of the characteristics of these washers is that when the drain pump starts making loud buzzing or grinding noises while running, the bearings in it are shot and the pump is no longer moving water out fast enough. The control board senses this and throws the various error codes you?re seeing, Replace my drain pump now (http://www.repairclinic.com/referral.asp?R=153&N=1373005)!
This is an example of one...
575 Drain pump assembly Manufacturer Number W10130913 (http://www.repairclinic.com/referral.asp?R=153&N=1373005)
More parts for the same washer....
576 Shock absorber kit of four. Manufacturer Number W10480711 (http://www.repairclinic.com/referral.asp?R=153&N=2304577)
577 Rubber door boot bellows. Creates seal between front of washing machine and tub that holds the water. Manufacturer Number W10111435 (http://www.repairclinic.com/referral.asp?R=153&N=1472809)
578 Door lock latch Manufacturer Number W10253483 (http://www.repairclinic.com/referral.asp?R=153&N=1515091)
jeff.
Washer issue
Brand: Whirlpool Duet Sport
Model Number: WFW8300SW01
Your Complaint:
Have been getting SD error followed by F-21 error. Manually drained washer and checked for anything in the drain pump filter, nothing there. Plugged back in and did drain/spin cycle and the washer would drain. After manually draining this time and starting drain/spin cycle, just heard a hum. The drain motor was previously very load. It didn?t drain and this time I got a F-33 error and noticed the drain pump was very warm to the touch.
All of the error codes and symptoms you?re describing, including the loud drain pump, are all classic signs of one thing: Time to replace the drain pump (http://www.repairclinic.com/referral.asp?R=153&N=1373005).
One of the characteristics of these washers is that when the drain pump starts making loud buzzing or grinding noises while running, the bearings in it are shot and the pump is no longer moving water out fast enough. The control board senses this and throws the various error codes you?re seeing, Replace my drain pump now (http://www.repairclinic.com/referral.asp?R=153&N=1373005)!
This is an example of one...
575 Drain pump assembly Manufacturer Number W10130913 (http://www.repairclinic.com/referral.asp?R=153&N=1373005)
More parts for the same washer....
576 Shock absorber kit of four. Manufacturer Number W10480711 (http://www.repairclinic.com/referral.asp?R=153&N=2304577)
577 Rubber door boot bellows. Creates seal between front of washing machine and tub that holds the water. Manufacturer Number W10111435 (http://www.repairclinic.com/referral.asp?R=153&N=1472809)
578 Door lock latch Manufacturer Number W10253483 (http://www.repairclinic.com/referral.asp?R=153&N=1515091)
jeff.