PDA

View Full Version : Frigidaire Front Load Washer Problem



John
02-08-2014, 04:09 PM
I am having a problem with my Frigidaire Model LTF53OFSO (Model:XC72115394) front load washing machine. When I close the door the lock light should but does not come on. If I press on the left side of the washer frame housing, the light will come on and the washer will work. It may work through 3/4 of its cycle; the light goes out and the washer stops. I will press again or insert something on the left side that will cause pressure on the left exterior housing, and it will continue through its cycle.

I did not remove the lock mechanism for the door or front panel to check anything at this point. In addition, how would I remove the front panel to give me a better view of what is occurring? Thank you for any information that you can send my way. Thanks again, John

jeff1
02-09-2014, 01:35 AM
Hi,


When I close the door the lock light should but does not come on. If I press on the left side of the washer frame housing, the light will come on and the washer will work. It may work through 3/4 of its cycle; the light goes out and the washer stops.

I couldn't find a safety switch on the dispenser drawer on the parts breakdown. So I am not sure if the left side is just a coincidence or not. This does sounds like a bad door switch issue....which is common.

588

589 Door lock and switch assembly. Manufacturer Number 131763202 (http://www.repairclinic.com/referral.asp?R=153&N=1531974)


http://www.youtube.com/watch?feature=player_embedded&v=prkM2XMoOJk

590 Door strike and latch, white Manufacturer Number 134456600 (http://www.repairclinic.com/referral.asp?R=153&N=1191142)


how would I remove the front panel to give me a better view of what is occurring?

You don't want to remove the front panal!....see video above to R&R the switch.

jeff.