PDA

View Full Version : weird frigidaire washer sound



Boman
03-12-2014, 12:59 AM
Another weird sounding appliance. Don't know what is going on.

Can't find the model number.

Frigidaire washer

So far: 1005865, 131685300 , 131986700


Need to know how to remove the agitator. I believe this to be a Maytag built washer.

jeff1
03-12-2014, 01:45 AM
Can't find the model number

639


So far: 1005865, 131685300 , 131986700

1005865 - nothing.
131685300 - control panal
131986700 - nothing


Need to know how to remove the agitator

A couple of common Frigidaires...
http://www.applianceaid.com/general-washing-machine-information.php#frig


I believe this to be a Maytag built washer

Maytag didn't build any Frigidaires.

jeff.

Boman
03-12-2014, 06:13 AM
Yeah, when I ran one of the numbers I listed, there were a few brands mentioned but no Maytag. So, I figured I was wrong on that. The front panel made me think of a Maytag.

Anyway, I did find where I was correct in assuming the trunion block had to come off. I had started removing the screws in the bottom of the tub and decided to wait and check out removing that.

Sounds like maybe something is between the tub and basket. Hoping it is not the transmission. Belongs to a neighbor.

Called myself looking in all the places for the model and serial number. Must have missed it somewhere.

Thanks

jeff1
03-12-2014, 12:23 PM
The front panel made me think of a Maytag.

The front access with screws at the bottom is similier.

jeff.

Boman
03-13-2014, 01:03 AM
Small nail had gotten through one of the holes in the inner tub and the head was slightly embedded in the plastic. :o

jeff1
03-13-2014, 02:18 AM
Small nail had gotten through one of the holes in the inner tub and the head was slightly embedded in the plastic. :o

Have actually seen one with a nail in the wash basket hole and during the spin the nail scraped through the outer holding tank...actually cut it all the way around.

jeff.

Boman
03-13-2014, 01:12 PM
Funny you should mention that. I told the guy and my wife he was lucky the whole bottom was not cut out of the outer tub.

jeff1
03-13-2014, 04:48 PM
Lucky for sure!

jeff.