PDA

View Full Version : GE profile light won't come on. #TCX18PAADRBS



joey.sinnett
07-21-2014, 02:44 PM
Hi,

THe light will no longer come on in the top portion of my #TCX18PAADRBS fridge. Tested the buld's in another fridge and they work fine. Unpluged the fridge for about 5 minutes and plugged it back in and still no lights. Tried to located the light switch but unless l'm going blind I cannot find one. It's pretty easy to find in the freezer but not to top part. I've heard about magnetic switches so I ran a magnet accross the frame but that didn't work either.

Any help is appreciated,

Joey

jeff1
07-21-2014, 05:08 PM
Hi,

Canadain model?

Yes this will have a magnet switch....switch is behind the center bar between the doors....magnet is inside the door liner.

797 LINK> Switch (http://www.repairclinic.com/referral.asp?R=153&N=300117)

Door may have dropped ( worn washers or hinges ) and is missing the switch now, bad switch, magnet moved inside the door....would have to be investigated.

jeff.

joey.sinnett
07-22-2014, 06:00 PM
Yes, Canadian model. Thanks for the quick response, I will look into this tonight.


QUOTE=jeff1;4897]Hi,

Canadain model?

Yes this will have a magnet switch....switch is behind the center bar between the doors....magnet is inside the door liner.

797 LINK> Switch (http://www.repairclinic.com/referral.asp?R=153&N=300117)

Door may have dropped ( worn washers or hinges ) and is missing the switch now, bad switch, magnet moved inside the door....would have to be investigated.

jeff.[/QUOTE]

jeff1
07-23-2014, 02:22 AM
Not sure if these will work as most/many Canadian models are not online...

http://partsnet.geappliances.ca/images/drawings/RE-359.pdf
#12
http://partsnet.geappliances.ca/images/drawings/RE-757.pdf
#18

jeff.