I have a stove (30" Amana: ACF3375AB) I'm trying to convert from NAT gas to LP gas. The manual says to read the included instructions to convert. There are (were) no included instructions. There are no instructions posted on the Amana site. I called Amana to buy conversion kit, none available, never was one available. Called my local appliance dealer, they looked up and found nothing either. Tech there is dumbfounded. I opened regulator on back of stove, it's not one of those with flip-able converter. Should I just hook it up and see if I can adjust everything to the correct flame height? Any suggestions?

This is a link to the specs on the stove, mines black, but all else the same:

http://www.a1electronics.net/acf3375aw.html